Single-Cell/Micro-Particle_Transfer-Glass_Micropipettes_and_Other_Accessories
Glass Micropipettes and Other Accessories
Silicone Tubing
Silicone tubing is required to connect the PicoPipet pipette part and a glass micropipette. The tubing needs to be cut into a 1.5-cm piece before use. The inner diameter is 0.8 mm and the outer diameter is 4 mm.
 |
|
| 1-ST-D: Silicone tubing 1.5m |
…
Glass micropipettes
The glass micropipette is connected to the PicoPipet pipette part through the silicone tube.
Straight shape for dishes/microscope slides
 |
| 1-GS15-10: 10 pcs glass micropipettes, straight shape, tip ID 15 um |
| 1-GT30-10: 10 pcs glass micropipettes, straight shape, tip ID 30 um |
| 1-GT50-10: 10 pcs glass micropipettes, straight shape, tip ID 50 um |
| 1-GT75-10: 10 pcs glass micropipettes, straight shape, tip ID 75 um |
 |
| 1-GT30S-5: 5 pcs glass micropipettes, S shape, tip ID 30 um |
| 1-GT50S-5: 5 pcs glass micropipettes, S shape, tip ID 50 um |
| 1-GT75S-5: 5 pcs glass micropipettes, S shape, tip ID 75 um |
 |
| 1-GS15L-10: 10 pcs glass micropipettes, L shape, tip ID 15 um |
| 1-GT30L-10: 10 pcs glass micropipettes, L shape, tip ID 30 um |
| 1-GT50L-10: 10 pcs glass micropipettes, L shape, tip ID 50 um |
| 1-GT75L-10: 10 pcs glass micropipettes, L shape, tip ID 75 um |
…
PCR 8-tube strip holder
This holder can accommodates a PCR 8-tube strip and a microscope slide/35-mm dish, and is used with the Compass video microscope. A single cell that is picked up by the PicoPipet can be discharged into a PCR tube checking the cell visually in the PCR tube.
 |
| 1-PCR8T-1: PCR 8-tube strip holder |
…
PCR 8-cap strip holder
This holder can accommodates a PCR 8-cap strip and a microscope slide/35-mm dish, and is used with an inverted microscope. A single cell that is picked up by the PicoPipet can be discharged into a PCR cap checking the cell visually in the PCR cap.
 |
| 1-PCR8-4: PCR 8-cap strip holder |
All features and specifications subject to change without notice.
